We – EPG Group the largest couplings and gears manufacturing unit in China with 5 distinct branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828 /
Polyurethane Component Spider, PU Aspect Spider, Gr Element Spider, GS Aspect Spider (3A2006)
Description: the polyurethane elastomeric is a new materials of polymer artificial among rubber and plastic. It has the two high toughness of plastic and high elasticity of rubber. Its traits are: one, a broad assortment of hardness. It even now has rubber elongation and resilience at large hardness. The polyurethane elastomeric has a hardness selection of Shore A10-D80. two. large power. At rubber hardness, the tensile power, tear toughness and load carrying potential are considerably greater than general rubber content. At large hardness, its impact strength and flexural energy are significantly higher than plastic substance. three, use-resistant. Its dress in resistance is really outstanding, normally in the range of .01-.10cmthree/1.61km, about three-five moments than rubber materials. 4, oil resistant. The polyurethane elastomeric is a very polar polymer compound which has lower affinity with non-polar mineral oil and is rarely eroded in gas oil and mechanical oil. five, good resistance to oxygen and ozone. 6, outstanding vibration absorption functionality, can do damping and buffering. In the mold manufacturing market, it replaces rubber and springs.seven, has great lower temperature overall performance. eight, radiation resistance. Polyurethane is highly resistant to high strength radiation and has satisfactory efficiency at ten-10 deg radiation dose. 9, with good machining performance.
The polyurethane coupling, rubber coupling are manufactured by injection with large high quality TPU substance or mould CSM/SBR. It is developing and unique for all sorts of steel shaft coupling with really good performance of high tensile power, substantial wear resistant, higher elastic resilience, drinking water resistant, oil resistant and outstanding tiredness resilience, high influence resistant and many others. We have full sets injection moulds and supply full range of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Gear J series couplings and many others. with high quality and excellent experience. Utilize to all varieties of industrial steel shaft coupling.
Technical specs:
materials: TPU, CSM/SBR, NBR, nylon and many others.
colour: yellow, crimson, purple, inexperienced, black, beige etc.
surface area: clean
tensile toughness: 8-55Mpa
hardness: 70-98Shore A
elongation: four hundred%-650%
density: 1.25g/cm3
elasticity affect: >25%
tear energy: 35-155KN/m
akron abrasion reduction:<0.05cmthree/one.61km
compression set (22h*70°C):<10%
operating temperature: 120°C
regular dimensions for polyurethane coupling:
GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180
GS5, GS7, GS9, GS12, GS14, GS19, GS24, GS28, GS38, GS42, GS48, GS550, GS65, GS75
MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13
ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13
MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200
HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280
L35, L50, L70, L75, L90/95, L99/one hundred, L110, L150, L190, L225, L276
FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R
SBT T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190, T210
Joong Ang CR0050, 0070, 571, 571, 2035, 2035A, 3545, 4560, 6070, 7080
MS571, MS571, MS1119, MS1424, MS1928, MS1938, MS2845, MS3860, MS4275, MS6510
D14, D14L, D20, D25, D30, D30L, D35, D40, D45, D49, D55, D65
5H, 6H, 7H, 8H, 9H, 10H, 11H
common dimension for rubber coupling:
Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315
HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280
L35, L50, L70, L75, L90/ninety five, L99/a hundred, L110, L150, L190, L225
NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265
NOR-MEX168-ten, NOR-MEX194-ten, NOR-MEX214-10, NOR-MEX240-10, NOR-MEX265-10
FCL1#, FCL2#, FCL3#, FCL4#, FCL5#, FCL6#, FCL7#, FCL8#
FCL90, FCL100, FCL112, FCL125, FCL140, FCL160, FCL180, FCL200, FCL224, FCL250, FCL280, FCL315, FCL335, FCL400, FCL450, FCL560, FCL630
Equipment 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J, 12J, 13J, 14J
Hytre 4H, 5H, 6H, 7H, 8H, 9H, 11H
Tyre F40, F50, F60, F70, F80, F90, F100, F110, F120, F140, F160
SBT T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T210
FCLpin #one, #2, #three, #4, #5, #six, #8
GR42, GR48, GR55, GR65, GR75
DL1, DL2, DL3, DL4, DL5, DL6, DL7, DL8, DL9, DL10, DL11
normal measurement for nylon coupling:
NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NL10
M28, M32, M38, M42, M48, M58, M65
packing in baggage, cartons, pallets or crates
OEM & EPT dimension are agreed
special offer all kinds of metal coupling for FCL, NM, MH, HRC, Really like Pleasure, Joongang, Centafelx, XL-GR, Tyre
***when you enquiry, pls affirm kind, dimensions variety and amount***
/ The use of first products manufacturer’s (OEM) element figures or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our company and the detailed EPT parts contained herein are not sponsored, authorized, or produced by the OEM. /
