We – EPG Team the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 various branches. For far more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
HXE-13DL Rod Breakdown Device with Annealer
HXE-13DL Copper rod breakdown machine is used to draw and anneal single bare copper wire from 8mm to 1.2mm to 4.5mm.The drawing capstans are arranged in a line that are able to work continuously with drawing speed and speed of mechanical parts and electrical control can be matched with each other. It is easy to operate, easy to change dies quickly. This machine has features of easy and convenient operation, high efficiency and good quality of product.
I. Compositions of equipments
| Title | Amount |
| one.Pay out-off shelf | 1 |
| two.HXE-13DL Main drawing machine | 1 |
| three.HXE-TH450 Annealing machine | one |
| four.HXE-180 Tension controller | 1 |
| five.HXE-SX 630 double spooler or fall coiler | one |
| 6.Electrical cabinet | 2 |
| 7.Operation panel | 1 |
| eight.User manual, Inverter instruction, Installation layout | |
| nine.Spare parts |
II.Spend-off shelf
1.Xihu (We EPT Lake) Dis. roller type which is attached ground root.
two.This unit is composed of a stand and a guide roller.
3.It is adopted advanced structure which has a single pole with a rotation arm.
4.This pay-off stand can load 2 Copper Rod coilers at the same time to achieve to pay off wires continuously.
five.Height of pay-off shelf 5000mm
6.The maximum diameter of inlet coiler 2000mm
7.Xihu (We EPT Lake) Dis. wheel diameter 590mm
eight.Quantity of guider 3 pcs
nine.Straightening function for the inlet rod
III. HXE-13DL Main drawing machine
Gearbox is welded by HT200 cast iron accurately as a whole piece. It has many excellent features, for instance higher rigidity, well sealing performance. Also it will not leak water and oil and can reduce vibration efficiently. The gearbox is treated with one-off orientational processing to make sure processing accuracy.
2.In the gear box, material of bevel gears is 20CrMnTi and it is treated with cemented quenching.
three.The surface of drawing capstan is in a double-cone shape to enhance its using life greatly.
four.The drawing box has double covers to seal. Covers are made of stainless steel. The outer cover has six parts and inner cover has four parts and can be open and closed by hand.
five.The bearings are NSK.
| one.Inlet | 8mm |
| two.Outlet | one.2mm-4.5mm |
| 3.Diameter of capstans | 450mm |
| 4.Speed | 1800m/min |
| 5.Slip ratio | 1.238 |
| 6.Quantity of capstan | thirteen |
| 7.Capstan | Tungsten carbide coated |
| 8.Quick dies change | Available |
| nine.Main motor | 250KW |
| ten.Final capstan motor | 75KW |
| eleven.Gear | Changeable |
| 12.Noises of machine | ≤85 db |
| 13.Protection cover | Installed |
| fourteen.Lubrication system | 1 set |
two.Composition
1.HXE-13DL Copper wire drawing machine
2.HXE-180 Tension controller
three.HXE-SX 630 or WF 800
four.Operation panel
five.General electric box for drawing
six.Pay-off shelf
3.HXE-thirteenDL Copper wire drawing machine
one.A3 welded by steel plate
two.Transmission: by gears and triangle belt
three.Capstans:total capstans number:5pcs, the four capstans are same and can be internal replaced,the final capstan is special.Tungsten carbide on the surface of capstans
4.Dies size:30mm×15mmTor /25mm×10mmT.The final dies size:25mm×10mmT.
five.Gears lubrication:Half Dip in + Pipe Spraying
six.Main motor:250KW, with 75KW frequency Inverter drive.
Certification
In exhibition
Welcome to examine HangZhou Hengxie EPT Co.,Ltd.
The use of authentic tools manufacturer’s (OEM) portion figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our company and the shown substitute elements contained herein are not sponsored, authorized, or manufactured by the OEM.
