Material Handling Electrical power UNIT one
Basic Description
This energy unit is intended for your fork lift sector, consisting of remarkably efficient gear pump, DC motor, guide increase and decrease valve, tank, ect. The up and down motion are managed from the lever of your guide release valve, which is equipped with an electrical switch to activate the motor. The lowing pace 
is managed through the stress compensated movement control valve.
Exclusive Notes
one. The duty of this energy unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean all the hydraulic elements concerned in advance of installation of the electrical power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should really also be clean and absolutely free of impurities, N46 hydraulic oil is advisable .
four. Oil transforming is needed following the original 100 operation hours, afterwards as soon as each and every 3000 hrs.
five. The power unit shown is created to be mounted horizontally.
Material Handling Power UNIT two
Common Description
This electrical power unit functions electrical power up gravity down circuit. Activate the start off solenoid to begin the motor to lift the machine. The lowing motion is activated by the solenoid valve using the decreasing pace managed by the pressure compensated movement handle valve. Goods of this series is often broadly used in the marketplace of logistic gadgets for example fork lift, mini lift table, and so on.
Specific Notes
one. The duty of this power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean the many hydraulic parts concerned before mounting the energy unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst,which must also be clean and no cost of impurities, N46 hydraulic oil is suggested .
4. Oil shifting is required right after the original one hundred operation hrs,afterwards after every single 3000 hours.
five. The power unit should be mounted horizontally.
